By - October 03, 2019, at 05:06 PM

1.  How to set Nquire1000II to simulate kiosk mode

1 Launch the Admin tool

2.Into Admin Mode set your APP available in "App Manager" and set it to automatically launch via "Lanch application".

3 Enter the "customer switch" in system settings, then disable the navigation bar switch (set to ON)

4 Restart the Admin tool then it will run your app automatically and like a kiosk mode (If you want to exit the kisko mode you need to press the physical button)

2.  How to Upgrade Scan Engine EM2037V4 of Nquire1000II for Enable ReRead Timeout