Recent Changes - Search:

Products

General resources

   Android
      DataEdit
   WinCE

edit SideBar

Commands / HowToSetSuffixForTheProductsThatSupportUnifiedCommand-barcodeProgramming :
By - March 09, 2020, at 10:12 AM

To set a custom suffix, scan the Set Custom Suffix barcode then the numeric barcodes corresponding to the hexadecimal value of a desired suffix then the Save barcode.

Set the custom suffix to “CODE” (HEX: 0x43/0x4F/0x44/0x45):

1. Scan the Enter Setup barcode.

2. Scan the Set Custom Suffix barcode.

3. Scan the numeric barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5” from the “Digit Barcodes” section inAppendix.

4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.

5. Scan the Enable Custom Suffix barcode.

6. Scan the Exit Setup barcode.

Barcode Programming:

1.scan” Enter Setup” barcode:

2.Scan “Set Custom Suffix” barcode

3. Scan the numeric barcodes “4”, “3”, “4”, “F”, “4”, “4”, “4” and “5” from the “Digit Barcodes” section in Appendix.

4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.

5. Scan the Enable Custom Suffix barcode.

6. Scan the Exit Setup barcode.

PS: Terminating Character Suffix A terminating character such as carriage return (CR) or carriage return/line feed pair (CRLF) can only be used to mark the end of data, which means nothing can be added after it.

To set a terminating character suffix, scan the Set Terminating Character Suffix barcode then the numeric barcodes corresponding to the hexadecimal value of a desired terminating character then the Save barcode.

eg:Set the terminating character suffix to 0x0A:

1. Scan the Enter Setup barcode.

2. Scan the Set Terminating Character Suffix barcode.

3. Scan the numeric barcodes “0” and “A” from the “Digit Barcodes” section in Appendix.

4. Scan the Save barcode from the “Save/Cancel Barcodes” section in Appendix.

5. Scan the Enable Terminating Character Suffix barcode.

6. Scan the Exit Setup barcode.

Edit - History - Print - Recent Changes - Search